Detect Devices
Detect Devices
No supported device found. Connect the device and press Detect.
Status
Qualcomm EDL 9008 (Snapdragon)
Firehose Loader
Auto-detect
...
Remove FRP
Factory Reset (wipe data)
Read Device Info
Reboot Device (EDL)
Select a firehose loader (.bin / .elf) or keep Auto-detect.
Status
Snapdragon / EDL 9008 — steps
1) Install Qualcomm QDLoader 9008 drivers. 2) Enter EDL (Test-Point or adb reboot edl).
3) Pick a firehose loader for your SoC (or Auto-detect). 4) Press Remove FRP.
1) Install Qualcomm QDLoader 9008 drivers. 2) Enter EDL (Test-Point or adb reboot edl).
3) Pick a firehose loader for your SoC (or Auto-detect). 4) Press Remove FRP.
Samsung (Odin protocol — Exynos & Snapdragon)
Odin Port
COM7 — SAMSUNG Mobile USB Modem▼
↻
Connect (Handshake)
Read PIT
Remove FRP (Download Mode)
Factory Reset
Odin Port
Samsung Exynos & Snapdragon — Download Mode
1) Power off. 2) Hold Vol− + Vol+ and plug the USB cable.
3) Install Samsung USB drivers. 4) Connect (handshake) then Remove FRP.
1) Power off. 2) Hold Vol− + Vol+ and plug the USB cable.
3) Install Samsung USB drivers. 4) Connect (handshake) then Remove FRP.
MediaTek (Preloader / BROM)
Download Agent (DA .bin)
C:\AnyFRP\data\DA\DA_PL_BIN_MT6765_SLA_signed.bin
Browse...
Read Chip Info
Remove FRP (DA required)
Connect (BROM Sync)
MediaTek Preloader / BROM — steps
1) Power off the device (remove battery if possible) or hold Vol−/Vol+.
2) Plug USB — the BROM port appears for a few seconds.
3) Read Chip Info to identify the SoC. 4) Remove FRP needs a matching DA.
1) Power off the device (remove battery if possible) or hold Vol−/Vol+.
2) Plug USB — the BROM port appears for a few seconds.
3) Read Chip Info to identify the SoC. 4) Remove FRP needs a matching DA.
ADB & Fastboot Bridge
Refresh Devices
R58N93X2Q7▼
Read Info (ADB)
FRP Bypass (legacy Android 5/6)
Reboot System
Reboot Bootloader
Reboot Recovery
Reboot EDL
Fastboot
Fastboot Info
Erase FRP (fastboot)
Reboot
Fastboot: enter bootloader first
(adb reboot bootloader or Vol− + Power)
then fastboot erase frp.
(adb reboot bootloader or Vol− + Power)
then fastboot erase frp.
License Activation
Activate
Hardware ID (HWID): 9C42F0D6A7B3E518D204C6F9A1E38B75
AnyFRP Licensing
• Activation binds the license to this machine (HWID).
• Plans: time subscription and/or operation credits.
• Offline grace: 72 hours after the last successful validation.
• Server: https://anyfrp.com/api
• Activation binds the license to this machine (HWID).
• Plans: time subscription and/or operation credits.
• Offline grace: 72 hours after the last successful validation.
• Server: https://anyfrp.com/api
Status
Licensed — Demo mode (simulation)